Product Description

New products 2021 hot sale professional 36v to 48v 350w motor controller dc motor speed controller ebike controller

Production Descriptione

1. available voltage : 60v

2. available watage : 800w

3. 9mosfet suitable for different kinds of electric vehicle

4. max current can be based on customers requests

wire collection

800W/500W 24V/ 36V/ 48V Brushless hub Motor Controller With Regenerative and Reverse

This controller is double mold controller, both could work with sensor and without sensor

If your hub motor wheel power is between 1500w-4000w, you can choose this controller.

What's included in the package

1. 48v-120v 100amp 4000w controller (voltage based on the choice of yours)

Technical data of the 48v-120v 36MOS Double mold 100Amp Controller

Size 30(33)*15*7cm

Commonly used operational functions of the controller

1. Turn the accelerator: conventional handle, potentiometer, pedal accelerator can be applied, stepless speed regulation, speed

Uniform and stable (multimeter 20K file discriminating handle, red table bar connected to 5V black table rod grounding line indication

It is about 1.94K; the red bar is grounded, and the black bar is connected to 5V and the indicator is about 1.89K.

All indicate 1 is infinity)

2. Brake power off: At the same time equipped with high potential and low potential brake power off, to meet the needs of various models

With the same need, usually the manufacturer below 500w models use more low level, the above is more use high level {brake

There are two wires in the switch. If the two wires have 12v voltage output when braking

Should be connected to the high level brake to break the wire; if both have no voltage or communicate with the negative pole

Connected to the low level brake line)

3. Speedometer: The speed signal is divided into voltage type and Hall type. The default is voltage type.

Press type, if it is Hall type can be modified)

4. Reverse reverse: The function of switching the reverse function is to let the car drive in the opposite direction, press the button (turn on

Black line and black and white two-color line) enter the reverse state, the motor automatically stops running, release the handle, when the electricity

When the machine is completely stopped, turn it back and turn it in the opposite direction; the reverse speed defaults to 40% of the full speed.

Reversing speed and reversing mode can be modified according to customer needs

5. Anti-consultation alarm: low-electric mine burglary alarm, can be equipped with designated anti-theft device. Parking status is pushed

When the car is in the car, the controller intelligently locks the motor. When the person pushes the motor forward, it pulls back, and the person pushes the motor backwards.

Just pull forward and alarm the alarm, the voice system prompts the status of each component and the status of the car.

(Matching mobile app, showing various functions such as speed and power GPS, need to be customized)

6. Dialing super three speed: dialing super 3 speed function, low gear is afterburner, mid-range full speed, high-grade

For overdrive, the default is at full speed, and the switch is switched by the dial button {press and not rebound)

Choose another gear. The default speed ratio is 80%/100%/120%

Button super three speed: button super 3 speed function, low gear for afterburner, mid-range full speed, high-grade

For overspeed, the default is at full speed, by tapping the touch button {press to immediately play

Switch "Switch to select other gears. The default speed ratio is 80%/100%/120%

Gear indicator: 3 gears correspond to three indicators, the indicator of the gear when it is in a certain gear

When the other is off, the gear shift indicator also switches. Default common cathode, can be changed to common anode

7. Intelligent identification: connect the power line, motor phase line, Hall line, electric door lock line, turn line, identification line;

After confirming the error, the motor will run automatically. If the motor turns correctly, it will run for 2 to 3 seconds.

Disconnect the identification line and the recognition is completed. If the motor is reversed, disconnect the identification line and plug it in immediately.

The motor automatically switches to forward rotation. After 2 to 3 seconds of operation, the identification line is disconnected and the identification is completed. Identify after receiving

The line remains disconnected, and the controller automatically adjusts the power supply voltage parameter and the motor phase sequence phase angle after recognition.